| 基于映射的产品装配建模技术研究 |
| |
| 引用本文： | 田建平,张旭.基于映射的产品装配建模技术研究[J].工程设计学报,2009,16(6):406-410. |
| |
| 作者姓名： | 田建平 张旭 |
| |
| 作者单位： | 1.四川理工学院 机械工程系, 四川 自贡 643000；2.北京理工大学 机械与车辆工程学院, 北京 100081 |
| |
| 基金项目： | "十一五"总装预先研究支持项目资助，过程装备与控制工程四川省高校重点实验室开放基金资助项目 |
| |
| 摘 要： | 根据自顶向下的设计要求,提出基于映射技术的功能模型向装配模型的转换方法.通过信息实例化及规则表达,保证了映射技术的可行性.通过建立不同的实例库和Mapping表,较好实现了模型信息的转换.通过功能单元映射为装配单元,功能间约束映射为装配连接特征以及装配关系,实现了设计约束的自顶向下传递和功能设计与结构设计的集成.利用二叉树对模型交互进行装配序列化处理,保证了装配模型结构的完整性与可装配性.通过开发原型系统验证了该方法的可行性.
|
| 关 键 词： | 映射技术 装配特征 装配模型 装配关系 功能约束 |
| 收稿时间： | 2009-12-28 |
Research on product assembly modeling technology based on mapping |
| |
| TIAN Jian-ping,ZHANG Xu.Research on product assembly modeling technology based on mapping[J].Journal of Engineering Design,2009,16(6):406-410. |
| |
| Authors: | TIAN Jian-ping ZHANG Xu |
| |
| Affiliation: | TIAN Jian-ping1,ZHANG Xu2(1.Department of Mechanical Engineering,Sichuan University of Science & Engineering,Zigong 643000,China,2.School of Mechanical & Vehicle Engineering,Beijing Institute of Technology,Beijing 100081,China) |
| |
| Abstract: | According to the requirement of top-down design,the transformation method from the function model to assembly model based on mapping was proposed.Through the information instantiation and rules expression,the feasibility of the mapping technique was guaranteed.Through establishing the different instance libraries and Mapping tables,transformation of the model information could be realized well.Through mapping the functional units to the assembly units,the functional constraints were mapped to the assembly c... |
| |
| Keywords: | mapping technology assembly feature assembly model assembly relation Junctional constraint |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《工程设计学报》浏览原始摘要信息 |
|
点击此处可从《工程设计学报》下载全文 |
|
