| 螺旋孔型斜轧变形的有限元分析 |
| |
| 引用本文： | 王俊元,梁义维.螺旋孔型斜轧变形的有限元分析[J].中北大学学报,2001,22(6):413-415. |
| |
| 作者姓名： | 王俊元 梁义维 |
| |
| 作者单位： | 华北工学院机械工程系 山西太原030051
(王俊元)，太原理工大学机械学院 山西太原030024(梁义维) |
| |
| 摘 要： | 目的 用有限元法探索斜轧变形的规律 .方法 在分析和合理简化的基础上 ,提出斜轧变形的有限元法模型 ,以 ANSYS软件为工具 ,对该模型进行计算分析 .结果 获得轧件横断面内的应力和应变分布 .结论 结果与其他方法的结果相吻合 ,曼内斯曼 (Manesmann)效应是循环应力下疲劳的结果
|
| 关 键 词： | 斜轧 螺旋孔型 有限元法 |
| 文章编号： | 1006-5431(2001)06-0413-03 |
| 修稿时间： | 2001年9月28日 |
Study on Deformation in Skew Rolling With Helical Groves by FEM |
| |
| WANG Jun yuan\ ,LIANG Yi wei\.Study on Deformation in Skew Rolling With Helical Groves by FEM[J].Journal of North University of China,2001,22(6):413-415. |
| |
| Authors: | WANG Jun yuan\ LIANG Yi wei\ |
| |
| Affiliation: | WANG Jun yuan\ 1,LIANG Yi wei\ 2 |
| |
| Abstract: | Aim\ To study deformation of skew rolling with helical groove. Methods\ After FEM model of skew rolling with helical groove is established by reasonable analysis and simplification of the metal forming process, numerical simulation is done for the model by means of ANSYS software. Results\ Stress and strain distribution in the cross section of workpiece are found. Conclusion\ The result of simulation is confirmed with that obtained by other methods. Mannesmann effect is caused by fatigue of the central part of workpiece. |
| |
| Keywords: | skew rolling helical groove FEM |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
