| 冷却速度对奥氏体不锈钢焊缝低温AkV2的影响 |
| |
| 引用本文： | 张 新,孟新军,王翰冬,李 伟. 冷却速度对奥氏体不锈钢焊缝低温AkV2的影响[J]. 焊管, 2017, 40(11): 18-21. DOI: 10.19291/j.cnki.1001-3938.2017.11.004 |
| |
| 作者姓名： | 张 新 孟新军 王翰冬 李 伟 |
| |
| 作者单位： | 西安德森新能源装备有限公司， 西安 710000 |
| |
| 摘 要： | 为了进一步优化移动式压力容器用奥氏体不锈钢焊缝低温冲击韧性，通过对奥氏体不锈钢焊缝采用空冷、气冷、铜冷的冷却方式，对3种冷却方式的焊缝进行了拉伸及-196 ℃低温冲击试验对比分析，并对其焊缝组织进行了观察分析，发现奥氏体不锈钢焊缝的组织中铁素体均匀分布于柱状晶两侧，因此其具有较高的抗拉强度。试验结果得出，铜冷方式冷却焊缝速度最快，从900 ℃到400 ℃降温时间为36 s，组织奥氏体化程度最高，焊缝-196 ℃低温冲击韧性值最优，为24.67 J。
|
| 关 键 词： | 奥氏体不锈钢 冷却速度 铜冷 低温韧性 焊缝 |
Influence of Cooling Speed on Low Temperature AkV2 of Austenitici Stainless Steel Weld |
| |
| ZHANG Xin,MENG Xinjun,WANG Handong,LI Wei. Influence of Cooling Speed on Low Temperature AkV2 of Austenitici Stainless Steel Weld[J]. Welded Pipe and Tube, 2017, 40(11): 18-21. DOI: 10.19291/j.cnki.1001-3938.2017.11.004 |
| |
| Authors: | ZHANG Xin MENG Xinjun WANG Handong LI Wei |
| |
| Affiliation: | Xi’an Desen New Energy Equipment Co., Ltd., Xi’an 710000, China |
| |
| Abstract: | In order to optimize the cryogenic impact toughness of austenitic stainless steel weld for mobile pressure vessels, air cooling, gas cooling and copper cooling were taken for austenitic stainless steel weld, the results of tensile test and -196 ℃ low-temperature impact test with the three cooling methods were analyzed and compared, the weld microstructure was observed and compared. The analyses showed that, ferrite was uniformly distributed on two sides of columnar crystal, so it has high tensile strength. The results indicated that the fastest cooling rate was by copper cooling, it took 36 s to cool form 900 ℃ to 400 ℃, and the cryogenic impact toughness of weld at -196 ℃ had optimal value 24.67 J. |
| |
| Keywords: | austenitici stainless steel cooling speed copper cooling low-temperature toughness weld |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《焊管》浏览原始摘要信息 |
|
点击此处可从《焊管》下载全文 |
|
