首页 | 本学科首页   官方微博 | 高级检索  
     

一种基于PIFA结构多频段手机天线的设计
引用本文:刘瑾,丁智勇,刘桥.一种基于PIFA结构多频段手机天线的设计[J].通信技术,2015,48(7):871-874.
作者姓名:刘瑾  丁智勇  刘桥
作者单位:贵州大学 大数据与信息工程学院,贵州 贵阳 550000
摘    要:设计了一款基于PIFA结构的手机天线,以多支节和增加寄生单元方式实现天线的小型化和多频段要求。采用HFSS13.0高频电磁仿真软件对天线进行仿真优化,最终得到天线的尺寸为33 mm×13 mm×8 mm,同时天线在多个频点处谐振。仿真结果表明,谐振点位置S11≤-10 dB,天线和馈线匹配良好,天线带宽足够同时覆盖GSM850、DCS1800、PCS1900、LTE2300/2500、ISM/Bluetooth、WLAN(2.4GHz)工作频段。对设计天线进行了加工和实测,实测与仿真结果吻合良好,验证了本设计的可靠性。

关 键 词:多频段  小型化  平面倒F天线  寄生单元  

A Multi-Band Antenna based on PIFA Structure for Mobile Phones
LIU Jin,DING Zhi-yong,LIU qiao.A Multi-Band Antenna based on PIFA Structure for Mobile Phones[J].Communications Technology,2015,48(7):871-874.
Authors:LIU Jin  DING Zhi-yong  LIU qiao
Affiliation:College of Big Data and Information Engineering, Guizhou University, Guiyang Guizhou 550000,China
Abstract:A mobile-phone antenna based on PIFA is designed, with way of multiple nodules and increasing parasitic elements to meet its requirements of miniaturization and multiple bands. The antenna is simulated and optimized with electromagnetic simulation software HFSS13.0 (High Frequency Structure Simulator),and the designed antenna is 33mm×13mm×8mm in size and resonates at multiple frequency points. Simulation results indicate that with parameter S11≤-10 dB,the proposed antenna could match well with feeder, and its bardwidth is enough to cover many operation frequency bands, including GSM850, DCS1800, PCS1900, LTE2300, LTE2300, ISM/Bluetooth and WLAN(2.4GHz).The proposed antenna is processed and measured, and the simulated results and measured results are quite idenical.All this eloquently verifies the reliability of this designed antenna.
Keywords:multi-band  miniaturization  PIFA  parasitic elements  
点击此处可从《通信技术》浏览原始摘要信息
点击此处可从《通信技术》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号