| 几种典型抗磨材料抗冲击磨粒磨损性能比较研究 |
| |
| 引用本文： | 向道平,唐建新. 几种典型抗磨材料抗冲击磨粒磨损性能比较研究[J]. 热加工工艺, 2004, 0(8): 58-60 |
| |
| 作者姓名： | 向道平 唐建新 |
| |
| 作者单位： | 1. 成都电子机械高等专科学校,机械工程系,四川,成都,610031
2. 四川大学,制造科学与工程学院,四川,成都,610065 |
| |
| 摘 要： | 在实验室条件下，用Amsler-135型磨损试验机，对高钒合金、高铬铸铁和贝氏体钢三种抗磨材料进行了抗冲击磨粒磨损性能试验。结果表明，在三种冲击载荷和两种不同磨料的试验条件下，高钒合金的抗磨性都最好，高铬铸铁次之，贝氏体钢最差。从金相组织方面分析了这三种抗磨材料的上述试验结果。
|
| 关 键 词： | 高钒合金 高铬铸铁 贝氏体钢 碳化物 冲击韧度 抗磨性 |
| 文章编号： | 1001-3814(2004)08-0058-03 |
| 修稿时间： | 2004-04-05 |
Comparing Investigation on Impact Abrasive Wear Resistance of Several Typical Wear Resistant Materials |
| |
| XIANG Dao-ping,TANG Jian-xin. Comparing Investigation on Impact Abrasive Wear Resistance of Several Typical Wear Resistant Materials[J]. Hot Working Technology, 2004, 0(8): 58-60 |
| |
| Authors: | XIANG Dao-ping TANG Jian-xin |
| |
| Abstract: | Under laborator conditions,impact abrasive wear resistame of high-V alloy,high-Cr white cast iron and bainitic steel was investigated with amsler-135 type wear machine. The results show that the abrasive wear resistance of high-V alloy is better than those of the two usual materials applied in test.The test results of abrasive wear resistance of three wear resistant materials are analysed through microstructure. |
| |
| Keywords: | high-V alloy high-Cr white cast iron bainitic steel carbide impact resistance wear resistantce |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
