| 7020铝合金搅拌摩擦焊与MIG焊接对比试验 |
| |
| 引用本文： | 周友龙,张力,陈舟,田博,张腾.7020铝合金搅拌摩擦焊与MIG焊接对比试验[J].电焊机,2011,41(11):91-94. |
| |
| 作者姓名： | 周友龙 张力 陈舟 田博 张腾 |
| |
| 作者单位： | 1. 西南交通大学材料科学与工程学院,四川 成都,610031
2. 长春轨道客车股份有限公司,吉林 长春,130026 |
| |
| 基金项目： | 中央高校科技创新基金资助项目 |
| |
| 摘 要： | 采用搅拌摩擦焊(FSW)和MIG焊对高速客车车体材料7020铝合金板进行焊接,分别测试焊接接头的拉伸和冲击性能,观察焊接接头的金相组织,并进行接头的硬度分布测试.结果表明,搅拌摩擦焊接头抗拉强度高达309 MPa,是母材的78％,与MIG焊接头相当.焊接接头软化状况比MIG焊程度弱.焊接接头各区组织的不均匀性造成了接头...
|
| 关 键 词： | 搅拌摩擦焊 7020铝合金 微观组织 硬度分布 |
Study on the FSW process of 7020 aluminum alloy comparing with the MIG welding |
| |
| ZHOU You-long,ZHANG Li,CHEN Zhou,TIAN Bo,ZHANG Teng.Study on the FSW process of 7020 aluminum alloy comparing with the MIG welding[J].Electric Welding Machine,2011,41(11):91-94. |
| |
| Authors: | ZHOU You-long ZHANG Li CHEN Zhou TIAN Bo ZHANG Teng |
| |
| Affiliation: | 1(1.Material Science and Engineering College,Southwest Jiaotong University,Chengdu 610031,China;2.Changchun Railway Vehicles Co.Ltd.,Changchun 130026,China) |
| |
| Abstract: | In this paper,7020 aluminum alloy plates used in super-speed vehicle are jointed by friction stir welding(FSW) and MIG welding.The mechanical property of the joints is tested.The microstructure is observed.And the distribution of the hardness of the joints is tested too.The results show that the tensile strength of the FSW joint is 309 MPa which reaches the 78% strength of the base material which equals to the MIG joint.The level of softening of the MIG joint is more serious than that of FSW joint.The nonuniform of the microstructure conduces to the nonuniform distribution of the hardness.The highest tenacity of the FSW joint is in weld-core zone for the equal-axle grain which compares with the MIG joint. |
| |
| Keywords: | FSW MIG 7020 Aluminum alloy microstructure distribution of hardness |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
