首页 | 本学科首页   官方微博 | 高级检索  
     

MECAR-BB处理制革综合废水的试验研究
引用本文:马兴元,余梅,吕凌云,余宁,刘琪. MECAR-BB处理制革综合废水的试验研究[J]. 中国皮革, 2011, 0(11)
作者姓名:马兴元  余梅  吕凌云  余宁  刘琪
作者单位:陕西科技大学资源与环境学院;
基金项目:咸阳市科技计划项目基金(XK0909-9); 陕西科技大学博士科研启动基金(BJ09-05),陕西科技大学研究生创新基金资助
摘    要:试验用自行设计的多级多相外循环厌氧反应器—生态滤床(MECAR-BB)高效联合工艺处理模拟制革废水,经过60d的试验,其启动与运行结果表明:在水力停留时间为24h时,进水COD负荷由500mg/L提升到3746mg/L,COD去除率能够很好地维持在70%以上;硫化物去除率维持在80%以上,出水硫含量<7mg/L;氨氮去除率维持在80%以上,出水氨氮<15mg/L;出水pH稳定在6.5以上,碳酸氢盐碱度与挥发酸的比值大于2,达到预期处理效果。

关 键 词:制革废水  MECAR-BB反应器  试验研究  

Tannery Wastewater Treatment by New MECAR-BB Reactor
Ma Xingyuan,Yu Mei,Lv Lingyun,Yu Ning,Liu Qi. Tannery Wastewater Treatment by New MECAR-BB Reactor[J]. China Leather, 2011, 0(11)
Authors:Ma Xingyuan  Yu Mei  Lv Lingyun  Yu Ning  Liu Qi
Abstract:The simulated tannery wastewater was treated with a self-designed anaerobic reactor-MECAR-BB(Multiple External Circulation-Biological Bed).After 60 days, the experiment results show that when hydraulic retention time is 24h,inlet COD loading is improved from 500mg/L to 3 746mg/L, the removal rate is more than70%. The removal efficiency of sulfur and ammonia nitrogen is around 80%. The content of sulfur and ammonia nitrogen in effluent would be less than 7mg/L and 15mg/L, respectively. The pH of effluent is ...
Keywords:tannery wastewater  MECAR-BB reactor  experimental study  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号