An FEM study on crack tip blunting in ductile fracture initiation

Ductile fracture is initiated by void nucleation at a characteristic distance (I_c) from the crack tip and propagated by void growth followed by coalescence with the tip. The earlier concepts expressed I_c in terms of grain size or inter-particle distance because grain and particle boundaries form potential sites for void nucleation. However, Srinivas et al. (1994) observed nucleation of such voids even inside the crack tip grains in a nominally particle free Armco iron. In an attempt to achieve a unified understanding of these observations, typical crack-tip blunting prior to ductile fracture in a standard C(T) specimen (Mode I) was studied using a finite element method (FEM) supporting large elasto-plastic deformation and material rotation. Using a set of experimental data on Armco iron specimens of different grain sizes, it is shown that none of the locations of the maxima of the parameters stress, strain and strain energy density correspond to I_c. Nevertheless, the size of the zone of intense plastic deformation, as calculated from the strain energy density distribution ahead of the crack tip in the crack plane, compares well with the experimentally measured I_c. The integral of the strain energy density variation from the crack tip to the location of void nucleation is found to be linearly proportional to J_IC. Using this result, an expression is arrived at relating I_c to J_IC and further extended to CTOD_c.