| 汽轮机螺栓硬度超标问题的研究与分析 |
| |
| 引用本文： | 王海凤.汽轮机螺栓硬度超标问题的研究与分析[J].热力发电,2009,38(7). |
| |
| 作者姓名： | 王海凤 |
| |
| 作者单位： | 哈尔滨汽轮机厂有限责任公司,黑龙江哈尔滨,150046 |
| |
| 摘 要： | 电厂反馈的信息表明,汽轮机安装时使用的紧固螺栓硬度经常超标.为此,对螺栓的生产工艺及质量检测等进行了分析.针对机械加工过程中造成的螺栓硬度偏低现象和热处理工艺不当引起的螺栓硬度超标现象,以及由于检测方法不一致引起的螺栓硬度超标问题提出了相应的解决办法.
|
| 关 键 词： | 电厂 汽轮机 紧固件 螺栓 硬度 |
STUDY ON AND ANALYSIS OF PROBLEM CONCERNING BOLT HARDNESS BEYOND STANDARD SET FOR STEAM TURBINES |
| |
| WANG Hai-feng.STUDY ON AND ANALYSIS OF PROBLEM CONCERNING BOLT HARDNESS BEYOND STANDARD SET FOR STEAM TURBINES[J].Thermal Power Generation,2009,38(7). |
| |
| Authors: | WANG Hai-feng |
| |
| Abstract: | The information fed back from power plants shows that the hardness of fastening bolts is of-ten beyond standard set for steam turbines. Regarding to this, the fabricating process and quality in-spection for bolts have been analysed. Directing against the lower bolt hardness resulted from mechani-cal fabrication process,and the phenomenon of bolt hardness beyond set standard caused by unproper heat treatment technology, as well as problem of bolt hardness beyond set standard due to different de-tection methods, corresponding solving methods have been put forward. |
| |
| Keywords: | power plnat steam turbine fastening device bolt hardness |
| 本文献已被 万方数据 等数据库收录！ |
|
