| 以最佳型壁温度为目标优化注塑模冷却系统设计 |
| |
| 引用本文： | 申开智 付晓蓉. 以最佳型壁温度为目标优化注塑模冷却系统设计[J]. 中国塑料, 2003, 17(11): 48-52 |
| |
| 作者姓名： | 申开智 付晓蓉 |
| |
| 作者单位： | [1]四川大学高分子科学与工程学院高分子材料工程国家重点实验室，四川成都610065 [2]四川大学化学工程学院，四川成都610065 |
| |
| 摘 要： | 以达到注塑件模具的某一模温为优化目标，考虑了模板热传导阻力和水对冷却水道壁的给热系数，用试差法求解冷却水道一边所需的传热面积，并完成冷却系统的设计计算。
|
| 关 键 词： | 注塑模具 模温 冷却系统 优化设计 |
Optimizating Cooling System of Injection Mold for a Suitable Temperature of Cavity Walls |
| |
| SHEN Kai zhi ,FU Xiao rong. Optimizating Cooling System of Injection Mold for a Suitable Temperature of Cavity Walls[J]. China Plastics, 2003, 17(11): 48-52 |
| |
| Authors: | SHEN Kai zhi FU Xiao rong |
| |
| Affiliation: | SHEN Kai zhi 1,FU Xiao rong 2 |
| |
| Abstract: | Resistance of mold plates to heat transfer and heat transfer coefficient between cooling channel walls and water were taken into account for obtaining a suitable mold temperature.The required area of cooling channels was calculated by trial and error method and used for cooling system design. |
| |
| Keywords: | injection mold mold temperature cooling system optimization design |
| 本文献已被 CNKI 维普 等数据库收录！ |
