| 防伪瓶盖注塑模强制脱模机构设计 |
| |
| 引用本文： | 陶筱梅,杜小清,刘好. 防伪瓶盖注塑模强制脱模机构设计[J]. 塑料科技, 2007, 35(11): 86-88 |
| |
| 作者姓名： | 陶筱梅 杜小清 刘好 |
| |
| 作者单位： | 茂名学院机电学院,广东,茂名,525000;茂名学院机电学院,广东,茂名,525000;茂名学院机电学院,广东,茂名,525000 |
| |
| 摘 要： | 分析了防伪瓶盖塑件的成型工艺。为解决塑件内螺纹及内侧凸起的脱模问题,设计了一种强制脱模结构注塑模,避免侧向分型,简化了模具结构。
|
| 关 键 词： | 防伪瓶盖 注塑模 强制脱模 |
| 文章编号： | 1005-3360(2007)11-0086-03 |
| 修稿时间： | 2007-08-14 |
Design of Forced Demoulding Mechanism for Injection Mould of Anti-Fake Bottle Cap |
| |
| Tao Xiaomei,Du Xiaoqing,Liu Hao. Design of Forced Demoulding Mechanism for Injection Mould of Anti-Fake Bottle Cap[J]. Plastics Science and Technology, 2007, 35(11): 86-88 |
| |
| Authors: | Tao Xiaomei Du Xiaoqing Liu Hao |
| |
| Affiliation: | College of Mechanical and Electrical Engineering; Maoming College; Maoming 525000; China |
| |
| Abstract: | Upon the basis of analyzing the mould prosess of moulded part——anti-fake bottle cap,an injection mould with forced demoulding mechanism was designed for the moulded part with internal thread and internal ribs,in such a way as to avoid the side parting and simplify the mould structure. |
| |
| Keywords: | Anti-fake bottle cap Injection mould Forced demoulding |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
