Underground hydrogen storage in a naturally fractured gas reservoir: The role of fracture

As hydrogen provides a high heating value with the least environmental impact, it can be considered as an energy carrier pioneer in following the global zero-carbon policies. Then, since storing hydrogen in large quantities can also be a valuable technique for alleviating energy shortages due to energy consumption fluctuations, underground hydrogen storage (UHS) is being explored further in today's world. To the best of our knowledge, the role of fracture on underground hydrogen storage performance has not comprehensively been evaluated. For the first time, in this study, the effects of fracture on hydrogen storage and production were investigated in a naturally fractured gas reservoir in the Middle East using a numerical simulation. Then, to determine whether the fracture was able to accelerate hydrogen production, UHS was evaluated under various conditions, including the fracture system, condensate presence, Initial hydrogen injection stage, cushion gas type, hydrogen storage commence time and different injection/production cycle duration. The results of this study proves that although a huge amount of hydrogen is invaded into the matrix during hydrogen injection, the fracture accelerates hydrogen production, resulting in higher hydrogen recovery and purity, which indicates fractures are suitable media for hydrogen storage. However, it should be noted that the purity of hydrogen produced from naturally fractured reservoirs (NFR) decreases more rapidly than a conventional one during a single cycle due to the higher mixing of gases in the fracture. In the case of the initial stage of hydrogen injection, fractures are not found to be attractive as storage media. Therefore, it is necessary to analyze the fracture effects as a storage media under various situations and stages. In addition, alternative gas injection revealed that nitrogen injection into cushion gas resulted in the highest hydrogen production in the entire porous media, whereas methane injection led to the highest hydrogen recovery in the fracture media. Also, the rapid injection/production cycle duration improved hydrogen recovery, indicating that the required time for high hydrogen invasion into the matrix is not provided during hydrogen injection.