| 应用SATWE和TAT软件的几个问题 |
| |
| 引用本文： | 吴应雄,吴广志.应用SATWE和TAT软件的几个问题[J].山东建筑工程学院学报,2000,15(4):94-98. |
| |
| 作者姓名： | 吴应雄 吴广志 |
| |
| 作者单位： | [1]湖南化工设计院厦门分院，福建厦门361009 [2]机械部第五设计研究院，天津300190 |
| |
| 摘 要： | 总结了在设计中应用钢筋混凝土框架结构三维空间分析软件SATWE和TAT时应注意的问题。通过对结构上采用平动计算与耦连计算的比较、侧刚计算与总刚计算的比较、对多塔计算的分析、底层层高合理取值的分析、上下抗侧移刚度比值的分析，说明在设计中、应根据工程实际情况并结合程序的计算原理进行设计前的详细分析，以使计算结果更趋合理。
|
| 关 键 词： | 框架结构 钢筋混凝土 SATWE TAT软件 |
Several problem on the application of software SATWE and TAT |
| |
| WU Ying xiong,et al.Several problem on the application of software SATWE and TAT[J].Journal of Shandong Institute of Architecture and Engineering,2000,15(4):94-98. |
| |
| Authors: | WU Ying xiong |
| |
| Affiliation: | WU Ying xiong 1 et al |
| |
| Abstract: | Several problems are studied, which should be noticed in the 3 dimensional analysis of reinforced concrete frame structure by the software SATWE and TAT. By the comparison of horizontal move calculation and couple calculation, the comparison of lateral stiffness calculation and general stiffness calculation, the analysis of the rational height of the first floor and the analysis of the ratio of the lateral stiffness between the up and down storey, such a conclusion is drawn that the analysis before design should be done carefully according to the special situation and the calculation principle of the program. |
| |
| Keywords: | frame structure software for 3 dimensional analysis antiseismic design |
| 本文献已被 CNKI 维普 等数据库收录！ |
