| 话务机座盖注射模设计 |
| |
| 引用本文： | 罗晓晔.话务机座盖注射模设计[J].机械制造与自动化,2004,33(4):31-33. |
| |
| 作者姓名： | 罗晓晔 |
| |
| 作者单位： | 杭州职业技术学院机电工程系,浙江,杭州,310018 |
| |
| 摘 要： | 分析了话务机座盖的工艺特点，对制件的成型特点，注射成型条件，模具的设计要点、结构和工作过程作了阐述。试制的话务机座盖一次试模成功，塑件品质良好。
|
| 关 键 词： | 话务机座盖 工艺 注射模 设计 |
| 文章编号： | 1671-5276(2004)04-0031-03 |
Filling Mold Designing for Telephone Outer Covering |
| |
| LUO Xiao-ye.Filling Mold Designing for Telephone Outer Covering[J].Machine Building & Automation,2004,33(4):31-33. |
| |
| Authors: | LUO Xiao-ye |
| |
| Abstract: | This thesis analyses the technique property of telephone outer covering and explains the feature of the products forming,its filling and forming condition and designing key points for molds,its structure and the working process.The filling of the outer covering into the mold can be done with good quality. |
| |
| Keywords: | telephone outer covering technique filling mold designing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
