| SiC颗粒增强铝基复合材料高速铣削实验研究 |
| |
| 引用本文： | 吴震宇,简小刚,孙方宏,刘国良,陈明. SiC颗粒增强铝基复合材料高速铣削实验研究[J]. 机械工程师, 2003, 42(8): 14-17 |
| |
| 作者姓名： | 吴震宇 简小刚 孙方宏 刘国良 陈明 |
| |
| 作者单位： | 上海交通大学机械与动力工程学院,上海,200030 |
| |
| 摘 要： | 对SiC颗粒增强铝基复合材料的高速切削加工性能进行了试验分析，研究了铣削速度对铣削力、切削温度、加工表面粗糙度、表面形貌和刀具磨损的影响，从而获得了能够保证对其进行高效率、高精度加工的合理工艺参数。
|
| 关 键 词： | SiC颗粒增强铝基复合材料 高速铣削 铣削力 切削温度 表面粗糙度 |
| 文章编号： | 1002-2333(2003)08-0014-04 |
| 修稿时间： | 2003-07-16 |
An Experimental Research on the High-speed Milling of SiC Particle Reinforced Aluminum Matrix Composites |
| |
| WU Zhen-yu,JIAN Xiao-gang,SUN Fan-ghong,LIU Guo-liang,CHEN Ming. An Experimental Research on the High-speed Milling of SiC Particle Reinforced Aluminum Matrix Composites[J]. Mechanical Engineer, 2003, 42(8): 14-17 |
| |
| Authors: | WU Zhen-yu JIAN Xiao-gang SUN Fan-ghong LIU Guo-liang CHEN Ming |
| |
| Abstract: | In this paper,the high-speed cutting performance of SiC particle reinforced aluminium matrix composites is analyzed through the milling experiments.The influences of cutting speed on cutting forces,cutting tempera-ture,roughness of surface,surface microstructure,and tool wear have been studied by the experiments.The appropriate cutting parameters in machining the composites with high efficiency and precision have also been obtained. |
| |
| Keywords: | SiC particle reinforced aluminium matrix composites high-speed milling cutting forces cutting tempera-ture roughness of surface |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
