Reactive sputter etching of Al in BCl3

Etching of Al is studied in pure BCl₃ as well as in mixtures with other gases in the reactive sputter etching mode in a cryopumped system. Etch rate, selectivity with respect to positive photoresist, SiO₂ and Si and etch profiles are investigated as a function of gas composition, gas pressure, flow rate and plasma power. Plasma chemical processes are monitored by quadrupole mass spectroscopy as well as by optical emission spectroscopy. Perfectly square Al-profiles can be etched if etch rates are kept below 1000 A/min. Al-patterns running over steep steps can also be clearly defined if a certain amount of overetching can be tolerated. The experimental data indicate that the etch process is reactant supply limited. Anisotropic etching is achieved by either a ‘surface inhibitor mechanism’ or the formation of a sidewall protecting film.