| 圆盘剪剪切钢板不平行度分析及对策 |
| |
| 引用本文： | 李国臣,朱际杰. 圆盘剪剪切钢板不平行度分析及对策[J]. 一重技术, 2010, 0(3): 8-10. DOI: 10.3969/j.issn.1673-3355.2010.03.003 |
| |
| 作者姓名： | 李国臣 朱际杰 |
| |
| 作者单位： | 1. 一重集团大连设计研究院有限公司,辽宁,大连,116600
2. 上海重型机器厂有限公司设计研究院,上海,200245 |
| |
| 摘 要： | 针对圆盘剪剪切镰刀弯问题,分析影响剪切平行度的主要因素,通过剪刃同步更换,优化调整剪刃垂直与水平刀缝,提高圆盘剪自动定位精度等措施,提高钢板镰刀弯控制水平。
|
| 关 键 词： | 镰刀弯 圆盘剪 夹送辊 垂直与水平剪刃间隙 平行度 |
Study and Countermeasure on Plate Nonparallelism Cut by Disc Shear |
| |
| Li Guochen,Zhu Jijie. Study and Countermeasure on Plate Nonparallelism Cut by Disc Shear[J]. CFHI Technology, 2010, 0(3): 8-10. DOI: 10.3969/j.issn.1673-3355.2010.03.003 |
| |
| Authors: | Li Guochen Zhu Jijie |
| |
| Affiliation: | Li Gudehen, Zhu Jijie |
| |
| Abstract: | Focusing on cambers caused Cutting of disc Shears, the article studies the primary cause for the nonparallelism on plates and proposes some countermeasures to reduce the cambers, such as simultaneous knife change, knife opening optimized adjustment and automatic Shear positioning accuracy improvement. |
| |
| Keywords: | camber disc shear pinch roll vertical and horizontal knife opening parallelism |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
