| 燃煤发电厂省煤器管高温冲蚀磨损特性的研究 |
| |
| 引用本文： | 刘少光,郭新成.燃煤发电厂省煤器管高温冲蚀磨损特性的研究[J].安徽工学院学报,1992,11(4):1-5. |
| |
| 作者姓名： | 刘少光 郭新成 |
| |
| 作者单位： | 安徽工学院材料工程系，安徽工学院材料工程系，安徽工学院材料工程系 合肥 230069，合肥 230069，合肥 230069 |
| |
| 摘 要： | 利用自制高温冲蚀磨损试验装置,对燃煤发电厂省煤器管道(20钢)进行高温冲蚀模拟试验,并对20钢室温冲蚀以及Ni-W合金刷镀层高温冲蚀作了对比试验。结果表明,局部塑性变形、疲劳剥落、犁削和切削作用是20钢管道高温冲蚀磨损的主要机理。Ni-W合金刷镀层脆性大,结合力不强,不能提高省煤器管道的使用寿命。
|
| 关 键 词： | 省煤器 高温冲蚀磨损 |
THE INVESTIGATION OF HIGH TEMPERATURE ERODING WEAR CHARACTERISTICS OF ECONOMIZER PIPES OF COAL-FIRED POWER STATIONS |
| |
| Authors: | Liu Shaoguang;Guo Xincheng;Shu Delin |
| |
| Affiliation: | Liu Shaoguang;Guo Xincheng;Shu Delin Department of Materials Engineering |
| |
| Abstract: | In this paper, high temperature eroding wear simulated test wasmade about 20 steel economizer pipes of coal-fired power station by using hightemperature eroding wear testing device made by ourself, meanwhile, the authorsmade the contrast test of room temperature eroding wear of 20 steel and hightemperature eroding wear of Ni-W electric brush coat. It has been shown thatlocal plastic deformation, fatigue spalling, cutting and ploughing are main hightemperature eroding wear mechanisms of 20 steel economizer pipes. High brittlenessand low connecting force of Ni-W electric brush coat can not improve the usinglifetime of economizer pipes. |
| |
| Keywords: | economizer 20 steel high temperature eroding wear |
| 本文献已被 CNKI 维普 等数据库收录！ |
