| 5A06铝合金焊接接头性能研究 |
| |
| 引用本文： | 刘红伟,王法科,王冬生,齐果,刘洪侠,陈东高.5A06铝合金焊接接头性能研究[J].兵器材料科学与工程,2009,32(2). |
| |
| 作者姓名： | 刘红伟 王法科 王冬生 齐果 刘洪侠 陈东高 |
| |
| 作者单位： | 1. 中国兵器科学研究院宁波分院,浙江,宁波,315103
2. 吉林机电工程学校,吉林,132101 |
| |
| 摘 要： | 分别采用手工钨极氩弧焊工艺和搅拌摩擦焊工艺对3mm厚5A06铝合金进行焊接,利用金相显微镜、扫描电镜等分析测试手段,研究不同工艺下的接头组织和性能。结果表明,钨极氩弧焊接头由于热输入量较大生成了粗大的铸态组织,而搅拌摩擦焊接头发生动态再结晶,生成细小的等轴晶粒,导致搅拌摩擦焊接头的抗拉强度和疲劳强度都比钨极氩弧焊接头的高。
|
| 关 键 词： | 5A06铝合金 搅拌摩擦焊 TIG 疲劳强度 |
Research on welding joint properties of 5A06 aluminum alloy |
| |
| LIU Hongwei,WANG Fake,WANG Dongsheng,QI Guo,LIU Hongxia,CHEN Donggao.Research on welding joint properties of 5A06 aluminum alloy[J].Ordnance Material Science and Engineering,2009,32(2). |
| |
| Authors: | LIU Hongwei WANG Fake WANG Dongsheng QI Guo LIU Hongxia CHEN Donggao |
| |
| Affiliation: | 1.Ningbo Branch of China Academy of Ordnance Science;Ningbo 315103;China;2.Jilin College of Mechanical and Electronic;Jilin 132101;China |
| |
| Abstract: | The 3mm thick 5A06 aluminum alloy welding experiments were done by TIG and FSW processes. Furthermore, the structures and properties of welding joint were examined and analyzed by means of optical microscope and SEM etc. The detection of microstructure was indicated that the crystal sizes of TIG became coarse because of lots of heat input and long- time exposure at a high temperature. While dynamic recrystallization of FSW occurred and fine grain was achieved,leading to higher tensile strength and the fatig... |
| |
| Keywords: | TIG |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
