Crystallization and pressure filtration of anhydrous milk fat: Mixing effects

Melt crystallization of anhydrous milk fat and subsequent filtration of the slurry is a common process for obtaining milk fat fractions with different physical and chemical properties. The crystallization mechanism is very complex and little is known about how the crystallizer conditions and the crystal size distribution (CSD) affect the filtration process. The objective of this study was to characterize the fractionation process and determine which geometric parameters of the crystallizer affect the filtration step. Two scales of fractionation were studied, 0.6 L and 3.6 L, with crystallization at 28°C. The slurry was pressure-filtered after 24 h at 500 kPa in a 1-L chamber. Impeller diameters and speeds were varied for both scales. Photomicroscopy and spectrophotometry were used to characterize the crystallization process, and filtration rates were measured by weighing the amount of filtrate passing through the filter. Filtration resistance values, calculated using the constant pressure filtration equation, as well as photomicroscopy results indicated that the agglomerates and crystals that formed had different morphological characteristics for the different mixing and flow regimes in the crystallizer. Crystallization conditions that provide an optimal filtration time, a solid fraction with minimal liquid entrainment, and a CSD with an intermediate range of sizes (80–500 μm) having good packing properties for filtration were found.