Effect of Ca and Mg on the properties of foamed ceramics prepared with multisolid waste

With vanadium tailings and lead-zinc tailings as the main raw materials, gold tailings, waste glass powder, other fluxes and SiC foaming agents are added to prepare foamed ceramics. The effects of Ca and Mg in the fluxes of calcite, talc, and dolomite on the appearance, pore size, porosity, bulk density, and compressive strength of the samples were investigated and the mechanisms of the effects were analyzed. The XRD results showed that the sample consisted primarily of quartz, albite, augite, and a small amount of corundum. Calcite favors the formation of the augite phase, talc favors the formation of the albite phase, and dolomite combines the advantages of both. The formation of albite reduces the viscosity of the melt, and the formation of augite greatly enhances the strength of foamed ceramics. It has been shown that by adding 8% dolomite, a foaming ceramic with a bulk density of .561 g/cm³, a porosity of 62.77% and a compressive strength of 10.823 MPa can be prepared, resulting in a low-cost, lightweight and high strength foamed ceramic partition.