Guniting linings of oxygen converters in the course of melting without stopping the blow

Problems arising in guniting converter linings in the course of melting without stopping the oxygen blow are considered. Deposition of a mixture based on magnesite is conducted in an oxygen jet. As the powder particles move in the vessel, they are heated due to the heat of the converter and afterburning of carbon monoxide, which ensures their strong cohesion with the surface of the lining. The velocity and diameter of the gas-powder jet are calculated as a function of the concentration of the periclase powder, the distance from the tuyere nozzle, and the temperature of the magnesite particles heated in the vessel. An experimental installation is developed and experiments on guniting in the course of melting without interrupting the blow are conducted. It is established that the gunited coating is deposited on the lining only at the end of melting. The endurance of the coating is 1–4 heats. In guniting, the temperature of the metal increases by 20–70°C. The experiments showed the possibility in principle of guniting a converter lining in the course of melting without interrupting the blow. Translated from Ogneupory, No. 3, pp. 27–31, March, 1996.