首页 | 本学科首页   官方微博 | 高级检索  
     

云南某铅锌矿矿石工艺矿物学研究
引用本文:方明山. 云南某铅锌矿矿石工艺矿物学研究[J]. 矿冶, 2011, 20(1): 100-103. DOI: 10.3969/j.issn.1005-7854.2011.01.024
作者姓名:方明山
作者单位:北京矿冶研究总院矿物加工科学与技术国家重点实验室,北京,100044
摘    要:云南某铅锌矿中主要的回收对象为闪锌矿和方铅矿,其锌、铅品位分别为5.64%和0.92%。通过系统的工艺矿物学研究,全面地了解了该铅锌矿的矿石性质。结果表明:该矿石的氧化程度较高并且矿石中闪锌矿和方铅矿的嵌布粒度细,这是影响其选矿指标的最主要的因素。

关 键 词:铅锌矿  工艺矿物学  嵌布粒度
收稿时间:2010-09-27

PROCESS MINERALOGY STUDY ON SOME LEAD-ZINC ORE IN YUNNAN
FANG Ming-shan. PROCESS MINERALOGY STUDY ON SOME LEAD-ZINC ORE IN YUNNAN[J]. Mining & Metallurgy, 2011, 20(1): 100-103. DOI: 10.3969/j.issn.1005-7854.2011.01.024
Authors:FANG Ming-shan
Affiliation:FANG Ming-shan (State Key Laboratory of Mineral Processing of China,Beijing General Research Institute of Mining and Metallurgy,Beijing 100044,China)
Abstract:Sphalerite and galena are the primary recoverable minerals in a lead-zinc ore in Yunnan.The grade of zinc and lead are 5.64% and 0.92% respectively.Through systemic process mineralogy study,it is found that the oxidation degree of the ore is high and the grain size distribution of sphalerite and galena are all fine.The results show that these two reasons are the main factors influencing floatation indexes of the ore.
Keywords:lead-zinc ore  process mineralogy  dissemination size  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《矿冶》浏览原始摘要信息
点击此处可从《矿冶》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号