Room Temperature Curing Epoxy Adhesives for Elevated Temperature Service

Room Temperature curing compositions of epoxy resins with high temperature service capability (95-120°C) were formulated and evaluated. The compositions were based on selected high functionality atomatic epoxy polymers and multicomponent poly amine curing agent systems. Toughening was achieved by addition of a rubbery phase either by prereaction of the epoxy resin with carboxyl terminated (CTBN) or by amine terminated (ATBN) poly butadiene acrylonitrile. The latter elastomeric component served as a part of the poly amine curing agent.

Best results were achieved with an adhesive formulation comprising tetra glycidyl-4-4'-diaminodiphenylmethane (TGDDM) and triglycidyl ether of p-aminophenol with triethylenetetramine and addition of ATBN with a felt carrier.

Lap shear strengths of aluminum/aluminum specimens primed by silane coupling agent in the order of 22 MPa at 25°C and 11 MPa at 120°C with T-Peel strengths of 1.6N/mm at 25°C and 0.52 N/mm at 120°C, were obtained.

The thermal behaviour and transitions, the chemical and mechanical properties, the microstructure and morphology of the selected adhesive formulation were studied, using DSC, Gehman, FTIR, mechanical testing and SEM analysis, respectively.

Experimental results showed that the selected compositions could develop good high temperature (120°C) properties while cured at room temperature. Furthermore, their high temperature performance compares favorably or even exceeds that of commercially available room-temperature-curing adhesive compounds, and are competitive with elevated temperature cured film adhesives.