首页 | 本学科首页   官方微博 | 高级检索  
     

RS485通信最优波特率研究
引用本文:彭韬,刘根利,杨宝军,翟渊. RS485通信最优波特率研究[J]. 无线互联科技, 2020, 0(3): 1-2
作者姓名:彭韬  刘根利  杨宝军  翟渊
作者单位:重庆科技学院智能技术与工程学院
基金项目:重庆市技术创新与应用发展项目(产业类重点研发),项目编号:cstc2018jszx-cyzdX0112;重庆市技术创新与应用示范项目(产业类重点研发),项目编号:cstc2018jszx-cyzdX0188。
摘    要:在RS485总线中,主机和从机通常使用固定的波特率进行通信;而在实际应用中,波特率的大小和传输的距离是成反比的,波特率越高传输的距离越短,误码率增加越大。为避免波特率过高通信不可靠的问题,根据硬件波特率自适应的机制,文章采用从机数量来计算最优的波特率的方式进行主从机通信。经过实验验证,可提高RS485通信系统的稳定性。

关 键 词:RS485总线  自适应  波特率

Research on optimal baud rate of RS485 communication
Peng Tao,Liu Genli,Yang Baojun,Zhai Yuan. Research on optimal baud rate of RS485 communication[J]. Wireless Internet Technology, 2020, 0(3): 1-2
Authors:Peng Tao  Liu Genli  Yang Baojun  Zhai Yuan
Affiliation:(School of Intelligent Technology and Engineering,Chongqing University of Science&Technology,Chongqing 401331,China)
Abstract:In the RS485 bus, the communication between the master and the slave usually uses a fixed baud rate for communication. In actual applications, the size of the baud rate is inversely proportional to the transmission distance. The higher the baud rate, the higher the transmission rate. The shorter the distance and the bit error rate will increase, in order to avoid the problem that the baud rate is too high and the communication is unreliable, according to the hardware adaptive baud rate mechanism, the master baud rate is calculated based on the number of slaves. After experimental verification, this solution can improve the stability of RS485 communication system.
Keywords:RS485 bus  adaptive  baud rate
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号