首页 | 本学科首页   官方微博 | 高级检索  
     

磨削、研磨、喷丸处理对马氏体不锈钢疲劳强度的影响
引用本文:李晓宏.磨削、研磨、喷丸处理对马氏体不锈钢疲劳强度的影响[J].常州信息职业技术学院学报,2003,2(4):17-19.
作者姓名:李晓宏
作者单位:黑龙江信息技术职业学院,黑龙江,哈尔滨,150086
摘    要:通过对马氏体不锈钢(2Cr13)试片热处理强化处理后,分别进行了磨削后研磨加工、喷丸处理,以探讨表层硬度、表层残余应力及表面粗糙度等因素对疲劳强度的影响。实验表明,减少表面粗糙度Ra值,增加表层残余应力是提高2Cr13不锈钢使用寿命的有效方法。

关 键 词:磨削  研磨  喷丸  马氏体不锈钢  疲劳强度  热处理  表层残余应力
文章编号:1672-2434(2003)04-0017-03
修稿时间:2003年10月23日

Effects of Grinding, Lapping and Cloud Bursting on Martensitic Stainless Steel's Fatigue Strength
LI Xiao-hong.Effects of Grinding, Lapping and Cloud Bursting on Martensitic Stainless Steel''''s Fatigue Strength[J].Journal of Changzhou Vocational College of Information Technology,2003,2(4):17-19.
Authors:LI Xiao-hong
Abstract:Grinding. abrasive processing and cloud bursting were conducted separately after intensifying heat treatment of martensitic stainless steel (2Cr 13)plates.The various factors. Such as superficial layer's hardness.residual stress of superficial layer.and surface roughness.that affect the fatigue strength were studied. Experiments indicated that decreasing the surface roughness(Ra)and raising the residual stress of superficial layer are the effective methods for prolonging service life of stainless steel(2Cr 13).
Keywords:fatigue strength  lapping  residual stress of superficial layer  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号