| 帘式折流片换热器壳程流体流动死区 |
| |
| 引用本文： | 古新,王珂,郝建设,刘敏珊,潘国华.帘式折流片换热器壳程流体流动死区[J].化工学报,2014,65(Z1):272-276. |
| |
| 作者姓名： | 古新 王珂 郝建设 刘敏珊 潘国华 |
| |
| 作者单位： | 郑州大学河南省过程换热与节能重点实验室, 河南 郑州 450002 |
| |
| 基金项目： | 国家自然科学基金项目（51006092）。 |
| |
| 摘 要： | 对帘式折流片换热器壳程流体流动死区大小及分布规律进行了数值模拟和实验研究。研究表明，帘式折流片换热器壳程流体流动死区大小随着Re的增加而降低；流动死区的大小和分布规律受折流栅装配方式的影响，折流栅同向装配时壳程死区小于折流栅对称装配，当壳程Re分别为5000、10000和15000时，折流栅同向装配时的帘式折流片换热器壳程死区分别为折流栅对称装配时的50.5%、51.6%、43.0%。
|
| 关 键 词： | 帘式折流片 流动死区 数值模拟 |
| 收稿时间： | 2014-02-11 |
| 修稿时间： | 2014-02-18 |
Flow dead zones in shell side of shutter baffle heat exchanger |
| |
| GU Xin,WANG Ke,HAO Jianshe,LIU Minshan,PAN Guohua.Flow dead zones in shell side of shutter baffle heat exchanger[J].Journal of Chemical Industry and Engineering(China),2014,65(Z1):272-276. |
| |
| Authors: | GU Xin WANG Ke HAO Jianshe LIU Minshan PAN Guohua |
| |
| Affiliation: | Key Laboratory of Process Heat Transfer and Energy Saving of Henan Province, Zhengzhou University, Zhengzhou 450002, Henan, China |
| |
| Abstract: | The size and distribution regularities of flow dead zone of shutter baffle heat exchanger were researched by numerical simulation and experiment. It is concluded that the size of flow dead zone in shell side of shutter baffle heat exchanger is reduced with increase of Reynolds number. The size and distribution of flow dead zone are affected by assemble types of shutter baffles. When the shutter baffle is co-rotating arranged, the size of dead zone in shell side was less than that of symmetrical. When Re=5000,Re=10000 and Re=15000, the dead zone in shell side of shutter baffle heat exchanger with shutter baffle co-rotating arrangement are respectively 50.5%、51.6%、43.0% of that with shutter baffle symmetrical arrangement. |
| |
| Keywords: | shutter baffle flow dead zone numerical simulation |
|
| 点击此处可从《化工学报》浏览原始摘要信息 |
|
点击此处可从《化工学报》下载全文 |
|
