| 1400型压裂泵动力端运动仿真及箱体有限元分析 |
| |
| 引用本文： | 蒋发光,梁政,钟功祥,任连城. 1400型压裂泵动力端运动仿真及箱体有限元分析[J]. 石油矿场机械, 2006, 35(5): 61-64 |
| |
| 作者姓名： | 蒋发光 梁政 钟功祥 任连城 |
| |
| 作者单位： | 西南石油大学,机电工程学院,四川,成都,610500 |
| |
| 摘 要： | 利用大型三维分析软件Pro/E的Pro/MECHANICA模块,采用多刚体动力学原理对1400型压裂泵动力端的运动和动载荷进行分析与仿真,对箱体施加设计计算和强度校核所需载荷,进而利用有限元法对箱体这个复杂结构零件进行分析与研究,为箱体乃至整个泵的设计和校核提供参考,为设计和研制复杂箱体提供了一种有效的分析方法。
|
| 关 键 词： | 压裂泵 仿真 箱体 有限元 |
| 文章编号： | 1001-3482(2006)05-0061-04 |
| 收稿时间： | 2006-03-30 |
| 修稿时间： | 2006-03-30 |
The kinetics of multi-body simulation of 1400 fracturing pump''''s power and the analyses of finite element method of pump cases |
| |
| JIANG Fa-guang,LIANG Zheng,ZHONG Gong-xiang,REN Lian-cheng. The kinetics of multi-body simulation of 1400 fracturing pump''''s power and the analyses of finite element method of pump cases[J]. Oil Field Equipment, 2006, 35(5): 61-64 |
| |
| Authors: | JIANG Fa-guang LIANG Zheng ZHONG Gong-xiang REN Lian-cheng |
| |
| Affiliation: | College of Machinery and Electyonic Engineering, Southwest Petroleum Institute, Chengdu 610500, China |
| |
| Abstract: | In the paper,Pro/MECHANICA module of Pro/E,a large-three-dimensional analysis software and kinetics of multi-body theory are used to count and check the pump case's performance.On the basis of the motion analyses of 1400 fracturing pump's power end and the simulation of kinetics about the pump,the loads that are required to count and check the pump case's performance were got.Then the complex construction of the pump case have been analyzed and studied by using finite-element method effectively.All of these can supply reference to designing and checking of the whole pump.This paper offers a kind of effective method to design and study the complex construction of the pump case. |
| |
| Keywords: | fracturing pump simulation pump case finite element method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
