| 注塑模具典型部件快速设计系统的开发 |
| |
| 引用本文： | 顾颂虞,古立福,单岩.注塑模具典型部件快速设计系统的开发[J].轻工机械,2010,28(3):26-29. |
| |
| 作者姓名： | 顾颂虞 古立福 单岩 |
| |
| 作者单位： | 1. 苏州技师学院,机电工程系,江苏,苏州,215009
2. 浙江大学,化工机械研究所,浙江,杭州,310027 |
| |
| 摘 要： | 随着产品结构的复杂化和外观的多样化,注塑模具中典型部件的使用越来越广泛,而典型部件的设计建模工作对模具设计效率的影响较大。文章基于UGNX开发了注塑模具典型部件快速设计系统,该系统主要由典型部件管理系统和数据管理系统2个部分组成。系统的开发采用了系列关键技术,并为数据管理系统开发了大量数据模型,将以标准件为主体内容提升到以典型部件为主体内容,从而大幅提高了模具设计效率。图7参9
|
| 关 键 词： | 机械设计 注塑模具 参数化设计 典型部件 快速设计 |
Development of Typical Part Rapid Design System of Injection Mould |
| |
| GU Song-yu,GU Li-fu,SHAN Yan.Development of Typical Part Rapid Design System of Injection Mould[J].Light Industry Machinery,2010,28(3):26-29. |
| |
| Authors: | GU Song-yu GU Li-fu SHAN Yan |
| |
| Affiliation: | 1.Department of Mechanical and Electrical Engineering,Suzhou Senior Technical Institue,Suzhou 215009,China;2.Institute of Chemical Machinery Engineering,Zhejiang University,Hangzhou 310027,China) |
| |
| Abstract: | With the complexity of product structure and the diversification of appearance,typical parts are used more and more wildly in injection mould and the modeling of these typical parts have great impact on the efficiency of mold design. The paper developed this typical part rapid design system of injection mould based on UG NX,which is composed of the typical part management and the data management system. The development of the system adopted a series of key technologies,constructed plenty of typical models,and made the standard parts as principal part,transfer to typical parts as principle part which increases the efficiency of mold design substantially. |
| |
| Keywords: | mechanical design injection mould parametric design typical part rapid design |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
