|
|||||
|
|
| 基于技术的医学内植物制造 | |
| 引用本文： | 葛夏文,曾文,颜永年,林峰.基于技术的医学内植物制造[J].机械设计与制造,2006(5):99-101. |
| 作者姓名： | 葛夏文 曾文 颜永年 林峰 |
| 作者单位： | 1. 昆明理工大学,机电学院,昆明,650093 2. 南昌大学,机电学院,南昌,330029 3. 清华大学,机械系,北京,100084 |
| 摘 要： | 利用目标组织的医学CT或MRI等测量数据，通过反求软件对数据进行反求、重构获得所需医学内植物的三维数据模型，由快速成形技术完成临床产品制造，是具有复杂形状医学内植物产品较为理想的制造方法。这里通过对两种内植物产品制造工艺的具体分析，阐述了这一先进制造技术在生物医学工程中的研究和应用。 |
| 关 键 词： | 反求工程 快速成形 图象处理 组织工程 |
| 文章编号： | 1001-3997（2006）05-0099-03 |
| 收稿时间： | 2005-06-18 |
| 修稿时间： | 2005-06-18 |
Fabrication of medical implant based on RE and RP technologies |
|
| GE Xia-wen,ZENG Wen,YAN Yong-nian,LIN Feng.Fabrication of medical implant based on RE and RP technologies[J].Machinery Design & Manufacture,2006(5):99-101. | |
| Authors: | GE Xia-wen ZENG Wen YAN Yong-nian LIN Feng |
| Affiliation: | 1.The Faculty of Mechanical and Electrical Engineering Kunming University of Science and Technology Kunming 650093, China; 2.Faculty Faculty of Mechanical and Electrical Engineering, Nanchang University, Nanchang 330029, China;3.Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China |
| Abstract: | As far as the medical implant of complex shape is concerned, this technology is a good way of fabrication which using the data of the object tissue measured by medical CT or MRI etc. to reverse and reconstruct three - dimensional digital model of medical implant with reverse software, the fabrication of clinical product is finished through rapid prototyping technology. This paper expounds the research and application of the advanced fabrication technology in biomedicine engineering through the ancdysis for two kinds of fabrication technology of medical implant. |
| Keywords: | RE RP Image processing Tissue engineering |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |