| 饮用水处理工程超滤膜系统设计关键技术 |
| |
| 引用本文： | 芮旻,周杰敏,许嘉炯,邬亦俊,吴国荣.饮用水处理工程超滤膜系统设计关键技术[J].给水排水,2010,36(1). |
| |
| 作者姓名： | 芮旻 周杰敏 许嘉炯 邬亦俊 吴国荣 |
| |
| 作者单位： | 1. 上海市政工程设计研究总院,上海,200092
2. 上海建科建设监理咨询有限公司,上海,200032 |
| |
| 摘 要： | 初步总结了饮用水处理超滤膜系统工艺设计的关键技术。净水厂超滤膜系统设计前应通过中试获得特定水质条件下准确的膜通量和系统回收率等设计参数,设计时仔细计算,复核比选,在考虑备用量,确保安全性的前提下尽量减少投资。膜系统布局强调合理、紧凑、美观,方便操作,管路布置要流畅,管材选用和设备选型需因地制宜,安全耐用。
|
| 关 键 词： | 饮用水处理 超滤膜 工程设计 关键技术 |
Key techniologies of the ultrafiltration membrane drinking water treatment design |
| |
| Rui Min,Zhou Jiemin,Xu Jiajiong,Wu Yijun,Wu Guorong.Key techniologies of the ultrafiltration membrane drinking water treatment design[J].Water & Wastewater Engineering,2010,36(1). |
| |
| Authors: | Rui Min Zhou Jiemin Xu Jiajiong Wu Yijun Wu Guorong |
| |
| Affiliation: | 1. Shanghai Municipal Engineering Design General Institute/a>;Shanghai 200092/a>;China/a>;2. Shanghai Jianke Project Management Co./a>;Ltd./a>;Shanghai 200032/a>;China |
| |
| Abstract: | The key technologies of ultrafiltration membrane drinking water treatment design were primarily generalized.Before the design of the ultrafiltration membrane system for drinking water treatment plant,the pilot test must be carried out to get the design parameters,such as accurate membrane flux and system recycling rate.During the design,careful calculation and re-check should be carried out and the investment should be reduced based on the consideration of the reserve level and safety security.The membrane ... |
| |
| Keywords: | Drinking water treatment Ultrafiltration membrane Engineering design Key technology |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
