|
|||||
|
|
The neutron irradiation effect on mechanical properties of HIP joint material |
|
| Authors: | Hirokazu Yamada Hiroshi Kawamura George Kalinin Satoshi Sato |
| Affiliation: | a Naka Fusion Research Establishment, Japan Atomic Energy Research Institute, Naka-machi, Naka-gun, Ibaraki-ken 311-0193, Japan b Oarai Research Establishment, Japan Atomic Energy Research Institute, 3607 Narita-cho, Oarai-machi, Higashiibaraki-gun, Ibaraki-ken 311-1394, Japan c ENES, P.O. Box 788, Moscow 101000, Russia Federation |
| Abstract: | Dispersion strengthened copper (DSCu) and stainless steel are the candidate material for the heat sink and the structural material of the ITER shielding blanket and these materials are joined by hot isostatic pressing (HIP). In this study, the neutron irradiation effect on mechanical properties of HIP joint material was examined by tensile and impact tests using specimens with irradiation damage of about 1.5 dpa. The results of tensile tests show that tensile strength of HIP joint material was about the same as that of DSCu base material, and this trend did not change after neutron irradiation. On the other hand, the impact value of HIP joint material was smaller than that of DSCu base material because of the diffusion of main elements at joint boundary. It was shown that embrittlement by the neutron irradiation effect is smaller than that of the effect by HIP joint. |
| Keywords: | C1000 J0100 N0100 R0300 S0600 |
| 本文献已被 ScienceDirect 等数据库收录！ | |