| 聚苯乙烯注塑成型制品双折射行为模拟分析 |
| |
| 引用本文： | 司军辉,刘琼,王乾廷,崔志香.聚苯乙烯注塑成型制品双折射行为模拟分析[J].福建建筑高等专科学校学报,2014(3):258-262. |
| |
| 作者姓名： | 司军辉 刘琼 王乾廷 崔志香 |
| |
| 作者单位： | 福建工程学院材料科学与工程学院,福建福州350108 |
| |
| 基金项目： | 国家自然科学基金（51303027）;福建工程学院科研启动基金（GY-Z13028）;福建省企业技术创新专项资金项目（2011-702-04） |
| |
| 摘 要： | 建立了模拟聚合物注塑成型过程中流动应力的数学模型.利用Leonov黏弹性模型对聚苯乙烯熔体在非等温幂率稳态剪切流下的流动行为进行模拟分析.并研究了聚苯乙烯在注塑成型填充过程中,由于流动而产生的剪切和拉伸作用以及模腔内聚合物熔体的温度变化对制品双折射行为的影响,得到了与实验相符的结果,证明了本研究中模拟方法的可行性.
|
| 关 键 词： | 聚苯乙烯 注塑成型 双折射行为 |
Simulation on birefringence of polystyrene injection-moulded parts |
| |
| Si Junhui,Liu Qiong,Wang Qianting,Cui Zhixiang.Simulation on birefringence of polystyrene injection-moulded parts[J].Journal of Fujian College of Architecture & C.E.,2014(3):258-262. |
| |
| Authors: | Si Junhui Liu Qiong Wang Qianting Cui Zhixiang |
| |
| Affiliation: | ( School of Materials Science and Engineering, Fujian University of Technology, Fuzhou 350118, China) |
| |
| Abstract: | A mathematical model was established to simulate the flow stress of polymer melt in injec- tion moulding process. The flow behaviour of polystyrene power-law fluid was investigated via the Leonov viscoelastic model under the condition of non-isothermal steady shear. In addition, the effects of shear and elongation formed when polymer melt flows in the cavity of the mould and the melt temperature changes along the cavity of the mould on the birefringence behaviour were studied at the polystyrene filling stage of the injection moulding process. The simulation results were consist- ent with the experimental data, indicating the feasibility of the simulation method. |
| |
| Keywords: | polystyrene injection moulding birefringence behaviour |
| 本文献已被 维普 等数据库收录！ |
