| 磨料喷射微细加工应用基础研究--喷嘴设计及加工试验 |
| |
| 引用本文： | 阎秋生,张自强,唐延辉.磨料喷射微细加工应用基础研究--喷嘴设计及加工试验[J].金刚石与磨料磨具工程,2002(2):19-21. |
| |
| 作者姓名： | 阎秋生 张自强 唐延辉 |
| |
| 作者单位： | 515063,汕头市,汕头大学工学院 |
| |
| 基金项目： | 教育部留学回国人员科研启动基金资助 |
| |
| 摘 要： | 磨料喷射微细加工是利用高压气体为介质加速磨料对工件形式冲击、冲蚀作用而去除材料的一种特种加工方法，适用于零件微细结构的加工和零件的表现处理。本文主要分析了磨料喷射加工的原理，设计了一套原理性试验装置，通过实验观察分析了磨料喷射加工过程，分析了其加工特性，提出了改进方案。
|
| 关 键 词： | 磨料喷射微细加工 喷嘴设计 加工试验 特种加工 实验装置 |
Investigationn on the Application of Abrasive Jet Micromachining——Design of Nozzle and Machining Experiments |
| |
| YAN Qiusheng et al.Investigationn on the Application of Abrasive Jet Micromachining——Design of Nozzle and Machining Experiments[J].Diamond & Abrasives Engineering,2002(2):19-21. |
| |
| Authors: | YAN Qiusheng |
| |
| Affiliation: | YAN Qiusheng et al |
| |
| Abstract: | Abrasive Jet Micro Machining(AJMM) is an unconventional machining technique,in which high pressure gas is used as medium to accelerate the abrasive grits and make them form an effect of impact or erosion on workpiece.It's applicable to the micro structural machining and the surface treatment of parts.In this paper,the principle of Abrasive Jet Machining(AJM) is mostly analyzed and a set of principle experiment device is contrived,the AJM process is observed through experiments,the characteristics of AJM are analyzed,and a improving project is presented. |
| |
| Keywords: | Abrasive Jet Machining(AJM) unconventional machining micro machining experiment device |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
