| 便携式蓄冷保温箱结构优化 |
| |
| 引用本文： | 刘翠娜,张双喜,周恒勤,许冬梅,李美芹.便携式蓄冷保温箱结构优化[J].吉林化工学院学报,2011,28(1):29-33. |
| |
| 作者姓名： | 刘翠娜 张双喜 周恒勤 许冬梅 李美芹 |
| |
| 作者单位： | 1. 青岛理工大学,环境与市政工程学院,山东,青岛,266033
2. 青岛建设集团股份公司,上海分公司,山东,青岛,266000 |
| |
| 摘 要： | 通过对便携式蓄冷保温箱在PCM放冷时的传热情况进行实验跟踪,得出各点的T-t曲线,发现底部冷量损失严重.遂提出保温箱结构的优化方案,并用ANSYS模拟对各方案下保温性能做出理论验证.通过对保温箱各项性能指标与底部聚氨酯发泡层厚度的关系的推导,得出聚氨酯发泡层的增厚在增强保温性能的同时会减少保温箱的有效容积;而真空绝热板与聚氨酯发泡组合而成的复合保温材料可起到在不减少保温箱有效容积的前提下降低箱体冷负荷15.7%的效果.
|
| 关 键 词： | PCM保温箱 真空绝热 结构优化 |
Structural optimization of the portable incubator with PCM |
| |
| LIU Cui-na,ZHANG Shuang-xi,ZHOU Heng-qin,XU Dong-mei,LI Mei-qin.Structural optimization of the portable incubator with PCM[J].Journal of Jilin Institute of Chemical Technology,2011,28(1):29-33. |
| |
| Authors: | LIU Cui-na ZHANG Shuang-xi ZHOU Heng-qin XU Dong-mei LI Mei-qin |
| |
| Affiliation: | LIU Cui-na1,ZHANG Shuang-xi1,ZHOU Heng-qin2,XU Dong-mei1,LI Mei-qin1(1.School of Environmental and Municipal Engineering,Qingdao Technological University,Qingdao 266033,China,2.Qingdao Construction Group Corporation,Qingdao 266000,China) |
| |
| Abstract: | Through experiment-tracking of the heat transfer of the portable incubator during the PCM-melting process,T-t curves of those points are obtained and the loss of refrigeration capacity from bottom is very serious.Thereupon the structural optimization schemes of the incubator is proposed,whose thermal insulation property is verified by ANSYS simulation.By deducing the relationships of various performance of the incubator and the thickness of the bottom foamed layer,it's inferred that the thermal insulation p... |
| |
| Keywords: | PCM incubator vacuum insulation structural optimization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
