| 仿生六足步行机器人步态轨迹的研究与仿真 |
| |
| 引用本文： | 闰尚彬,韩宝玲,罗庆生.仿生六足步行机器人步态轨迹的研究与仿真[J].计算机仿真,2007,24(10):156-160. |
| |
| 作者姓名： | 闰尚彬 韩宝玲 罗庆生 |
| |
| 作者单位： | 1. 北京理工大学机械与车辆工程学院,北京,100081
2. 北京理工大学机电工程学院,北京,100081 |
| |
| 摘 要： | 针对仿生六足步行机器人关节较多,其步态轨迹规划和关节控制量计算都较为复杂的现状,采用Solidworks软件与MSC.ADAMS软件相结合的方式对六足仿生步行机器人的样机模型进行了运动学仿真与分析.通过仿真,验证了所设计的三角步态的适用性和所选择的三次样条曲线作为机器人足端点轨迹曲线方案的可行性.详细阐述了六足仿生步行机器人轨迹仿真的原理、方法及过程,找到了一种在ADAMS环境下求解机器人逆解的方法,简化了理论计算,提高了设计效率.
|
| 关 键 词： | 六足仿生步行机器人 步态规划 运动学仿真 虚拟样机 仿生 六足步行机器人 三角步态 轨迹仿真 研究 Robot Hexapod Bionic Track Simulation 设计效率 理论计算 简化 逆解 求解 环境 过程 方法 原理 阐述 |
| 文章编号： | 1006-9348（2007）10-0156-05 |
| 修稿时间： | 2006-09-14 |
Research and Simulation of the Walking Track of Bionic Hexapod Walking Robot |
| |
| RUN Shang-bin,HAN Bao-ling,LUO Qing-sheng.Research and Simulation of the Walking Track of Bionic Hexapod Walking Robot[J].Computer Simulation,2007,24(10):156-160. |
| |
| Authors: | RUN Shang-bin HAN Bao-ling LUO Qing-sheng |
| |
| Affiliation: | 1.School of Mechanical and Vehicular Engineering;Beijing Institute of Technology;Beijing 100081;China;2.School of Mechatronics Engineering;Beijing Institute of Technology;Beijing 100081;China |
| |
| Abstract: | As there are many joints in the bionic hexapod walking robot and the calculation of its walking track and joints control unit are comparatively complicated,the kinematical simulation and analysis of the model of bionic hexapod walking robot have been done by using solidworks and MSC.ADAMS.Through simulaton,the applicability of designed triangle gait and the feasibility of using thrice curve as the feet track are validated.And the principle,method and course of the track simulation of bionic hexapod walking robot are expatiated in detail.Thus a way for finding a converse answer of the robot on condition of ADAMS is found,so the theoretical calculation is simplified and the design efficiency is improved. |
| |
| Keywords: | Bionic hexapod walking robot Gait planning Kinematics simulation Virtual prototype |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
