| 展成电解加工的成形规律研究 |
| |
| 引用本文： | 张永俊,徐家文.展成电解加工的成形规律研究[J].广东工业大学学报,1995(Z1). |
| |
| 作者姓名： | 张永俊 徐家文 |
| |
| 作者单位： | 广东工学院机械工程系，南京航空航天大学机械工程系 |
| |
| 摘 要： | 对内喷式阴极展成电解加工时电压Ｖ、进给速度ｖ、电解液压力Ｐ、温度Ｔ对加工间隙的影响进行了试验研究。同时对用脉冲电流展成电解加工进行了讨论，所得结论为展成电解加工的实际应用提供了依据。
|
| 关 键 词： | 电解加工 展成加工 间隙试验 |
The study of Forming Regularity in ECCEM |
| |
| Zhang Yongjun,Xu Jiawen.The study of Forming Regularity in ECCEM[J].Journal of Guangdong University of Technology,1995(Z1). |
| |
| Authors: | Zhang Yongjun Xu Jiawen |
| |
| Affiliation: | Zhang Yongjun;Xu Jiawen(Guangdong Uniuersity of Technology)(Nanjing University of Aero. & Astro.) |
| |
| Abstract: | In this paper, the influence of voltage,cathod feed-rate electrolyte temperature and electrolyte pressure on the gap in ECCEM is studied and the result of pulse electrochemical contour evolution machining is discussed,which provide a basis for applying electrochemical contour evolution machining to practise. |
| |
| Keywords: | ECM contour evolution machining gap experiment |
| 本文献已被 CNKI 等数据库收录！ |
