首页 | 本学科首页   官方微博 | 高级检索  
     

双半轴轴系结构的功率流传递特性
引用本文:李秋红,薛开,李燕. 双半轴轴系结构的功率流传递特性[J]. 哈尔滨工程大学学报, 2011, 32(9): 1163-1167. DOI: 10.3969/j.issn.1007-7043.2011.09.012
作者姓名:李秋红  薛开  李燕
作者单位:哈尔滨工程大学机电工程学院,黑龙江哈尔滨,150001
基金项目:中央高校基本科研业务费专项资金资助项目(HEUCF110701)
摘    要:针对双半轴转台结构在工作中的振动问题,建立了具有典型半轴式结构的转台轴系(轴—轴承—框架)动力学模型.采用传递矩阵和子结构导纳功率流法,分别推导了转台轴系的各部分子结构的功率流表达式,通过实验分析了转台各部分结构的功率流传递特性;并从系统的振动传递路径角度,采用振动功率流法分析了转台各部分结构的能量损耗情况.实验结果表明:具有典型半轴式结构的转台,其闭环式结构特点会导致结构振动产生明显的耦合情况;从振动传递路径角度,以功率流作为评价指标能更有效地分析出各条传递路径上的能量损耗情况,并针对性地采取减振降噪措施.

关 键 词:半轴式结构  转台  子结构导纳  传递路径  功率流

Study on power flow characteristics of a double half shaft system
LI Qiuhong,XUE Kai,LI Yan. Study on power flow characteristics of a double half shaft system[J]. Journal of Harbin Engineering University, 2011, 32(9): 1163-1167. DOI: 10.3969/j.issn.1007-7043.2011.09.012
Authors:LI Qiuhong  XUE Kai  LI Yan
Affiliation:LI Qiuhong,XUE Kai,LI Yan(College of Mechanical and Electrical Engineering,Harbin Engineering University,Harbin 150001,China)
Abstract:In considering the vibration problem of the double half shaft turntable structure,a dynamic model of the turntable shafting of a typical half shaft system(shaft-bearing-framework) was established.Applying the transfer matrix method and sub-structure mobility method,the power flow expression of the sub-structure was deduced.Through testing,the characteristics of power flow were analyzed in the turntable along with the energy loss result of every part of the turntable by the power flow method from the perspec...
Keywords:half shaft system  turntable  sub-structure mobility method  transmission path  power flow  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号