基于嵌入式的脉搏波Dtrend算法实现 |
| |
引用本文: | 周莹,覃凤,刘强,张粦熙. 基于嵌入式的脉搏波Dtrend算法实现[J]. 工业控制计算机, 2019, 32(2): 74-75 |
| |
作者姓名: | 周莹 覃凤 刘强 张粦熙 |
| |
作者单位: | 广东理工学院电气工程系,广东 肇庆,526100;广东西江学院外语系,广东 肇庆,526000 |
| |
摘 要: | 设计了一种可应用于嵌入式微控制器的Dtrend算法实现方法。可应用于脉搏波信号的基线漂移的滤除,或其它有低频基线漂移的信号,从而使近周期信号处于同一水平线。因Dtrend算法的系数计算涉及到矩阵的求逆,所以很难在嵌入式系统中直接计算。首先在Matlab中计算出Dtrend系数,再将值通过串口传输到嵌入式系统的外置Flash当中。在进行基线漂移滤除算法实现时,通过分段读取Flash当中相应的系数进行计算,进而实现脉搏波源信号的基线漂移滤除。
|
关 键 词: | 基线漂移 Dtrend 系数计算 脉搏波 |
Pulse-wave Dtrend Algorithm Achieve Based on Embedded System |
| |
Abstract: | This paper puts forward a method to implement Dtrend algorithm that can be applied to embedded systems.It can be applied to filtering the baseline drift of pulse wave signals,or other signals with low frequency baseline drift, which shift the near-period signals to the same horizontal line.So the method of this paper is that calculates Dtrend coefficient in Matlab,and then transmit the coefficient to the external Flash of the embedded system through the serial port.When the baseline drift filtering algorithm is implemented,the corresponding coefficients in the flash are read partly to calculate,then the baseline drift of the pulse wave in source signal is filtered out. |
| |
Keywords: | baseline drift Dtrend coefficient calculation pulse-w |
本文献已被 维普 万方数据 等数据库收录! |
|