| 基于宏程序的抛物线曲面加工程序应用研究 |
| |
| 引用本文： | 何成文. 基于宏程序的抛物线曲面加工程序应用研究[J]. 煤矿机械, 2006, 27(12): 116-117 |
| |
| 作者姓名： | 何成文 |
| |
| 作者单位： | 徐州师范大学,机电工程学院,江苏,徐州,211008 |
| |
| 摘 要： | 对回转抛物线曲面的几何特性进行了研究分析,根据抛物线曲面的几何形状特点,在保证表面加工质量的前提下,应用等间距法进行逼近计算,利用FANUC0i-TA数控系统的宏程序功能并结合G73、G70循环指令编制出具有通用性、适用性且应用简单的回转抛物线曲面的粗、精加工宏程序。
|
| 关 键 词： | 用户宏程序 回转抛物线曲面 循环指令 |
| 文章编号： | 1003-0794（2006）12-0116-02 |
| 收稿时间： | 2006-05-22 |
| 修稿时间： | 2006-05-22 |
Application Research of Numerical Control Turning Gramming of Parabolic Profile Based on Custom Macro |
| |
| HE Cheng-wen. Application Research of Numerical Control Turning Gramming of Parabolic Profile Based on Custom Macro[J]. Coal Mine Machinery, 2006, 27(12): 116-117 |
| |
| Authors: | HE Cheng-wen |
| |
| Affiliation: | Electrical and Mechanical College, Xuzhou Normal University, Xuzhou 211008, China |
| |
| Abstract: | According to the analysis of the geometry haracteristic of parabolic profile, gives general user micros for parabolic profile in NC rough and finishes machining processing under guarantee for quality, by way of the appliance of equally spaced approximation calculation, micro, function and G73, G70 instructions of FANUC0iTA CNC system. |
| |
| Keywords: | user micro parabolic profile loop instruction |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
