| 高频纤焊的余热热处理 |
| |
| 引用本文： | 杨蕴林,徐春花. 高频纤焊的余热热处理[J]. 热加工工艺, 1994, 0(2) |
| |
| 作者姓名： | 杨蕴林 徐春花 |
| |
| 作者单位： | 洛阳工学院 |
| |
| 摘 要： | 通过对４０Ｃｒ钢钎头高频钎焊后进行端冷处理和油—空冷处理．使易失效部位获Ｂ＋Ｍ复合组织而提高其机械性能的试验研究．探讨了利用钎焊余热对钢进行热处理强化的可行性。
|
| 关 键 词： | 高频钎焊，热处理 |
Heat Treatment by Residual Heat of High Frequency Induction Brazing |
| |
| Yang Yunlin,Xu Chunhua. Heat Treatment by Residual Heat of High Frequency Induction Brazing[J]. Hot Working Technology, 1994, 0(2) |
| |
| Authors: | Yang Yunlin Xu Chunhua |
| |
| Affiliation: | Yang Yunlin;Xu Chunhua |
| |
| Abstract: | The microstructures of endquenched and oil-air cooled of 40Cr steel borer head after high frequency induction brating was studied. The treatments can make the location which is liable to failure to gain the bainite and martensite fixture, thus raising the local properties. The paper explores the possibility of using the high frequency induction brating residual heat to strengthen The steel by heat treatment. |
| |
| Keywords: | high frequency induction brating heat treatment |
| 本文献已被 CNKI 等数据库收录！ |
