| 磨料水射流抛光时工艺参数对工件去除量的试验研究 |
| |
| 引用本文： | 成建联,宋国英,李福援. 磨料水射流抛光时工艺参数对工件去除量的试验研究[J]. 西安工业学院学报, 2002, 22(1): 67-71 |
| |
| 作者姓名： | 成建联 宋国英 李福援 |
| |
| 作者单位： | 西安工业学院机电工程系 陕西西安710032(成建联，宋国英)，西安工业学院机电工程系 陕西西安710032(李福援) |
| |
| 基金项目： | 陕西省自然科学基金 (99C17) |
| |
| 摘 要： | 将磨料水射流用于零件表面的光整加工是一门新工艺、新方法。本文借助正交设计方法研究了磨料水射流用于光整加工时的工艺参数，包括磨料的粒度、种类、硬度以及工作压力、加工时间等对表面粗糙度和表面去除量的影响。获得的结果对应用磨料水射流光整加工技术和设计相应的工艺设备具有指导意义和实用价值。
|
| 关 键 词： | 工艺参数 去除量 试验研究 磨料水射流 抛光 压力 去除率 零件表面光整加工 磨粒 |
| 文章编号： | 1000-5714(2002)01-0067-05 |
| 修稿时间： | 2001-07-16 |
Effects of parameters on the removal rate in abrasive water jet polishing |
| |
| CHENG Jian lian,SONG Guo ying,LI Fu yuan. Effects of parameters on the removal rate in abrasive water jet polishing[J]. Journal of Xi'an Institute of Technology, 2002, 22(1): 67-71 |
| |
| Authors: | CHENG Jian lian SONG Guo ying LI Fu yuan |
| |
| Abstract: | Abrasive water jet (AWJ) polishing is a kind of new process. The purposes of this paper are to obtain AWJ parameters according to experiment results. The effective factors include the type,granularity and rigidity of abrasive,process press as well as process time. The orthogonal experiment method is applied to etudy the relationship between process parameters and the material removal rate. According to removal rate, the surface roughness is controlled. The results are of significance and practice value for development and popularization of AWJ polishing technology. |
| |
| Keywords: | abrasive water jet polishing press removal rate abrasive |
| 本文献已被 CNKI 维普 等数据库收录！ |
