| 电弧炉冶炼连铸SGM钢棉钢工艺试验 |
| |
| 引用本文： | 徐建华. 电弧炉冶炼连铸SGM钢棉钢工艺试验[J]. 钢铁研究, 1999, 0(1): 3 |
| |
| 作者姓名： | 徐建华 |
| |
| 作者单位： | 沙钢集团有限公司 |
| |
| 摘 要： | 硬质夹杂是影响钢棉钢高速切削性能的最主要因素，用电弧炉冶炼、连铸此钢种，不用铝而只用少量Ｓｉ－ Ｃａ 线脱氧及渣面用ＣａＣ２ 粒脱氧，避免了钢中硬质夹杂的生成，保证了钢材的切削性能
|
| 关 键 词： | 电弧炉 脱氧 硬质夹杂 切削性能 |
| 修稿时间： | 1998-06-23 |
EXPERIMENT OF SMELTING STEEL WOOL GRADE IN EAF & CC |
| |
| Xu Jianhua. EXPERIMENT OF SMELTING STEEL WOOL GRADE IN EAF & CC[J]. Research on Iron and Steel, 1999, 0(1): 3 |
| |
| Authors: | Xu Jianhua |
| |
| Affiliation: | Shangang Group Co.Ltd. |
| |
| Abstract: | The hard inclusions are found to the primary factors affecting.The high speed cutting property of the steel wool products.The cutting characteristic of steel wool wire rod produced in EAF and CC can be improved by adding a small amount of Si-Ca instead of Al with CaC 2 for deoxidation,thus avoiding the generation of solid inclusions in steel and ensuring the cutting property. |
| |
| Keywords: | EAF deoxidation hard inclusion cutting property |
| 本文献已被 CNKI 维普 等数据库收录！ |
