| 高性能PC／ABS合金的研制 |
| |
| 引用本文： | 麦伟宗,李景,黄李胜,许灯波. 高性能PC／ABS合金的研制[J]. 合成材料老化与应用, 2013, 0(6): 12-13,53 |
| |
| 作者姓名： | 麦伟宗 李景 黄李胜 许灯波 |
| |
| 作者单位： | 广州合成材料研究院有限公司,广东广州510665 |
| |
| 基金项目： | 广州合成材料研究院有限公司基金项目：无卤阻燃PC/ABS合金的研制（2012-5） |
| |
| 摘 要： | 利用双螺杆挤出机制备PC／ABS合金，探讨了基材不同种类的选择及其比例的调整对PC／ABS合金性能的影响。结果表明：在PC／ABS合金（70／30）体系中，选用23．23％SAN粉料和5．89％高胶粉替代ABS粒料制成的合金缺口冲击强度可达95．04kJ／m^2，拉伸强度达58．28MPa，弯曲强度达73．8MPa。
|
| 关 键 词： | PC ABS合金 高胶粉 SAN 力学性能 |
Research on High Quality PC/ABS Alloy |
| |
| MAI Wei-zong,LI Jing,HUANG Li-sheng,XU Deng-bo. Research on High Quality PC/ABS Alloy[J]. Synthetic Materials Aging and Application, 2013, 0(6): 12-13,53 |
| |
| Authors: | MAI Wei-zong LI Jing HUANG Li-sheng XU Deng-bo |
| |
| Affiliation: | ( Guangzhou Research Institute Co. Ltd. of Synthetic Materials, Guangzhou 510665, Guangdong, China) |
| |
| Abstract: | The PC/ABS alloy was prepared by tw in-screw extruder. The selection of different resin and ditlerent resin inverse proportion were discussed. The results show that notch impact strength is 95.04kJ/m2, the tensile strength is 58.28 MPa, the flexural strength is 73.8 MPa （70/30）. by adding 23.23% SAN and 5.89% PB into PC/ABS |
| |
| Keywords: | PC/ABS alloy PB SAN mechanical property |
| 本文献已被 维普 等数据库收录！ |
|
