| 聚苯硫醚纤维的制备及性能研究 |
| |
| 引用本文： | 吴乐,兰建武,陈玲玲,任元元,刘波. 聚苯硫醚纤维的制备及性能研究[J]. 合成纤维工业, 2007, 30(5): 11-13 |
| |
| 作者姓名： | 吴乐 兰建武 陈玲玲 任元元 刘波 |
| |
| 作者单位： | 四川大学轻纺与食品学院,四川,成都,610065;四川大学轻纺与食品学院,四川,成都,610065;四川大学轻纺与食品学院,四川,成都,610065;四川大学轻纺与食品学院,四川,成都,610065;四川大学轻纺与食品学院,四川,成都,610065 |
| |
| 摘 要： | 对聚苯硫醚(PPS)切片进行了熔融纺丝,测定了拉伸倍率、拉伸温度、热定型温度对纤维性能的影响。结果发现,随着拉伸倍率和热定型温度的提高,纤维的断裂强度和熔点都提高,断裂伸长则下降;随着拉伸温度的提高,纤维的熔点降低,断裂强度和双折射率则先降低后升高,出现最低值。在初生纤维的冷结晶温度110℃附近进行拉伸,纤维的断裂强度最低。在310℃对PPS进行纺丝,初生纤维在90℃拉伸4.5倍后,再在180℃紧张热定型5min,获得了断裂强度为3.9 cN/dtex的PPS纤维。
|
| 关 键 词： | 聚苯硫醚 熔融纺丝 拉伸 热定型 断裂强度 |
| 文章编号： | 1001-0041（2007）05-0011-03 |
| 修稿时间： | 2007-01-29 |
Preparation and properties of polyphenylene sulfide fiber |
| |
| Wu Le,Lan Jianwu,Chen Lingling,Ren Yuanyuan,Liu Bo. Preparation and properties of polyphenylene sulfide fiber[J]. China Synthetic Fiber Industry, 2007, 30(5): 11-13 |
| |
| Authors: | Wu Le Lan Jianwu Chen Lingling Ren Yuanyuan Liu Bo |
| |
| Abstract: | Polyphenylene sulfide(PPS)chips were melt spun into fibers.The effects of draw ratio,drawing temperature and heat setting temperature on the properties of PPS fiber were studied.The results showed that the breaking strength and melting point of the fiber were increased and the elongation at break was decreased when the draw ratio and heat setting temperature were raised;The melting point of the fiber was decreased and the breaking strength and birefraction were decreased to a minimum first- ly and then increased when the drawing temperature was elevated.The breaking strength was minimized when the as-spun fiber was drawn at cool crystallization temperature 110℃.The PPS fiber with breaking strength 3.9 cN/dtex can be prepared by spin- ning PPS chips at 310℃,drawing as-spun fiber 4.5 times at 90℃and heat setting at 180℃for 5 min under tension. |
| |
| Keywords: | polyphenylene sulfide melt spinning drawing heat setting breaking strength |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
