Electrochemical properties of lithium sulfur cells using PEO polymer electrolytes prepared under three different mixing conditions |
| |
Authors: | S.S. Jeong Y.T. LimY.J. Choi G.B. ChoK.W. Kim H.J. AhnK.K. Cho |
| |
Affiliation: | Glocal Leader Development Center for i-cube Materials and Parts & ITRC for Energy Storage & Conversion, Gyeongsang National University, Jinju 660-701, South Korea |
| |
Abstract: | Lithium sulfur cells were prepared by composing with sulfur cathode (PEO)6LiBF4 polymer electrolyte and lithium anode. (PEO)6LiBF4 polymer electrolyte was prepared under three different mixing conditions: stirred polymer electrolyte (SPE), ball-milled polymer electrolyte (BPE) and ball-milled polymer electrolyte with 10 wt%Al2O3 (BCPE). The effects of ball milling and additive were investigated by discharge test according to depth of discharge. The initial discharge capacity of lithium sulfur cell using BCPE was 1670 mAh g−1-sulfur, which was better than those of SPE and BPE, and approximately equal to the theoretical capacity. The cycle performance of Li/(PEO)6LiBF4/S cell was remarkably improved by the addition of Al2O3. |
| |
Keywords: | Sulfur Polymer electrolyte Ball milling Lithium sulfur cell Al2O3 |
本文献已被 ScienceDirect 等数据库收录! |