| 基于VB的数据处理系统处理齿距偏差和齿距累积误差 |
| |
| 引用本文： | 朱冬云,黄建清,王刚,蔡兴培.基于VB的数据处理系统处理齿距偏差和齿距累积误差[J].机械制造与自动化,2006,35(3):54-57. |
| |
| 作者姓名： | 朱冬云 黄建清 王刚 蔡兴培 |
| |
| 作者单位： | 华南热带农业大学,机电与信息工程学院,海南,儋州,571737;华南热带农业大学,机电与信息工程学院,海南,儋州,571737;华南热带农业大学,机电与信息工程学院,海南,儋州,571737;华南热带农业大学,机电与信息工程学院,海南,儋州,571737 |
| |
| 摘 要： | 根据齿轮齿距偏差和齿距累积误差的计算方法和图解原理,利用VB程序实现数据自动处理,求得齿轮齿距偏差和齿距累积误差;结合Flash软件实现动态演示,开发了高效、形象、直观的工作系统,提高数据处理的速度和准确度,实现可视化。
|
| 关 键 词： | VisualBasic6.0 数据处理 齿距 偏差 误差 |
| 文章编号： | 1671-5276（2006）03-0054-04 |
| 收稿时间： | 2006-04-12 |
| 修稿时间： | 2006-04-12 |
Developing the Data Processing System Based on VB Tooth Pitch Deviation and Tooth Pitch Accumulated Error |
| |
| ZHU Dong-yun,HUANG Jiang-qin,WANG Gang,CAI Xing-pei.Developing the Data Processing System Based on VB Tooth Pitch Deviation and Tooth Pitch Accumulated Error[J].Machine Building & Automation,2006,35(3):54-57. |
| |
| Authors: | ZHU Dong-yun HUANG Jiang-qin WANG Gang CAI Xing-pei |
| |
| Affiliation: | Mechanical and Electrical and Information Engineering Institute, South China University of Tropical Agriculture, HN Danzhou 571737, China |
| |
| Abstract: | According to gear tooth pitch deviation and tooth pitch accumulated error computational method and graphic solution principle,using the VB procedure to realize automatic reduction data,the gear tooth pitch deviation and the tooth pitch accumulated error are obtained.By realization of dynamic demonstration of the Flash software,the highly effective,vividly and direct-viewing work system is developed to enhance the speed of the data processing,the accuracy and visualization. |
| |
| Keywords: | VisualBasic6 0 |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
