| Abstract: | Resonant grating waveguide structures were used to fabricate narrow-bandwidth optical filters. Azopolymer films were deposited on top of slab waveguides, and surface relief gratings were optically inscribed on them to be used as couplers. This technique is a simple one-step process and produces efficient gratings with high accuracy. Sharp resonant peaks are observed in the transmission and the reflection spectra of these structures. The thickness and the index of refraction of the waveguide can be accurately determined from these resonances by use of modal theory. These parameters are then used in the design of an optical filter. Bandwidths of less than 1 nm and a decrease in transmitted signal of 60% are reported. Measurement of these values was limited by the divergence of the probe beam. |
