首页 | 本学科首页   官方微博 | 高级检索  
     

实体桩复合地基承载原理
引用本文:王长科,孙会哲.实体桩复合地基承载原理[J].岩土工程界,2000(2):22-25.
作者姓名:王长科  孙会哲
作者单位:[1]石家庄市勘察测绘设计研究院 [2]中国兵器工业北方勘察设计研究院
摘    要:实体桩指目前在地基处理中普遍采用的低强度混凝土桩、水泥土柱等刚性桩、半刚性桩、实体桩复合地基承载原理分为两种:被动上刺原理和主动下刺原理。复合地基由桩、桩间土及其上的褥垫层组成。上部结构通过基础将荷载传递给褥垫层,褥垫层根据桩、桩间土及其与褥垫层的共同作用,再分配给桩、桩间土。基桩承载力的大小受到群桩效应、负摩阻力等因素的影响。桩土应力比最终值是褥垫材料性能、厚度、应力状态、桩与桩间土刚度等的函数

关 键 词:实体桩  复合地基  承载原理  设计计算

LOAD-BEARING PRINCIPLE OF SOLID PILE IN COMBINED FOUNDATION
WANG Chang-ke,SUN Hui-zhe,WANG Yong-zheng,LU Hong-gen.LOAD-BEARING PRINCIPLE OF SOLID PILE IN COMBINED FOUNDATION[J].Geotechnical Engineering World,2000(2):22-25.
Authors:WANG Chang-ke  SUN Hui-zhe  WANG Yong-zheng  LU Hong-gen
Abstract:Solid pile means rigid and semi-rigid pile with low strength concrete and cement commonly used in foundation treament.Its load-bearing principle is classed into two:passive top-punturing and active down-punturing.Combined foundation consists of piles,pile soil and mattress layer.Load at top structure is transmitted to mattress layer through foundation,then to pile and soil by the action of pile,pile soil and mattress layer.Foundation pile load is affected by group pile effect and negative friction resistance and etc.End value of soil stress ratio is a funtion of performance,thickness,stress state of mattress materials,and pile and soil stiffness. Calculation method for pile load and strength,combined load,mattress layer thickness,foundation settlement is described in the paper.
Keywords:combined foundation of solid pile  load-bearing principle  design and calculation
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号