首页 | 本学科首页   官方微博 | 高级检索  
     

金属桁架结构成形工艺分析
引用本文:王天琪,张宏宇,耿冬寒,李亮玉,杨壮. 金属桁架结构成形工艺分析[J]. 焊接学报, 2020, 41(11): 25-30. DOI: 10.12073/j.hjxb.20200225001
作者姓名:王天琪  张宏宇  耿冬寒  李亮玉  杨壮
作者单位:天津工业大学,天津市现代机电装备技术重点实验室,天津,300387
基金项目:国家自然科学基金;天津市自然科学基金
摘    要:针对电弧增材制造过程中桁架结构难以制造的问题,提出一种基于冷金属过渡(CMT)点焊工艺的逐点添加空间桁架结构增材制造技术.通过工艺成形试验获得最优的工艺参数,并对桁架结构焊接过程进行受力分析,建立桁架结构制造过程受力数学模型,有效地解决了成型过程中立柱的下榻、熔滴在立柱上的下淌以及焊枪轮廓与构件的碰撞问题.通过受力分析数学模型得出,焊枪以垂直于基板的方向对桁架结构进行堆积时,桁架立柱出现下塌现象的临界角为50°.将数学模型与桁架结构成型路径策略相结合,可以对复杂立体特征桁架构件进行增材制造.最后通过改变单个立柱弯曲角度的桁架结构增材试验,得到满足成型精度要求的桁架结构件,验证了数学模型的正确性及桁架焊成形方法的可行性.

关 键 词:电弧增材制造   桁架焊   桁架成型   碰撞   路径规划
收稿时间:2020-02-25

Research on forming technology of metal truss structure
Affiliation:Advanced Mechatronics Equipment Technology Tianjin Area Laboratory, Tianjin polytechnic University, Tianjin 300387, China
Abstract:Aiming at the problem that it is difficult to manufacture truss structures, this paper proposes a point-by-point additive manufacturing technology for space truss structures based on cold metal transition (CMT) spot welding. First, the optimal process parameters are obtained through process forming tests, and then the force analysis during the welding process of the truss structure is performed. Based on the force analysis in this paper, a mathematical model of the force analysis in the truss welding manufacturing process is proposed on this basis, which effectively solves the collapse of the column, the drip of molten droplets on the column, and the collision of the torch contour with the component during the truss forming process. Finally, a truss forming test was performed to change the bending angle of a single column to verify the correctness of the mathematical model and the feasibility of the truss welding method.
Keywords:
本文献已被 万方数据 等数据库收录!
点击此处可从《焊接学报》浏览原始摘要信息
点击此处可从《焊接学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号